How to connect a SAGE7 controller to the Internet
Configuring a SAGE7 for Wireless Internet

PROCEDURE:
1) Power Up the RT300 FES Cycle, and allow the SAGE Controller to fully initialize (wait for the GO screen).

2) Tap the white square with the globe (bottom of the screen in the center).

3) Tap Show Wi Fi Manager

4) This should open a WLAN1 box.  Your network should show on the list if it is broadcasting its SSID.

5) If your network has (PREFERRED) next to it, then skip to step 10.  If it does not say preferred, go to step 6.

6) Highlight your network and hit CONNECT on the bottom.  This will open a wireless properties box.

7) If the settings ARE NOT OPEN and DISABLED for authentication and encryption, then your network has a password which you will need to know.  Contact us if you don't know the password.

8) If a password is required, remove the check mark for "The key is automatically provided", then type your password into the network key box.

9)  Hit OK to the window, or return on the keyboard.  It should now return to the WLAN1 screen and say (PREFERRED) next to the name.

10) Check that the STATUS (below the white box) now says CONNECTED to (your wireless network).

11) Tap IP Information (tab at the top), and confirm the IP address IS NOT a 169.xxx.xxx.xxx number.  If it is, then the settings you have entered are not correct.  Go to step 13.

12) If the IP address looks OK (hint... compare it to another device on the network... the first 6 numbers should be the same... like 192.168.xxx.xxx or 172.153.xxx.xxx, 10.10.xx.xx, etc) then hit OK to the window, and go to step 15.

13) If the IP address is a 169.xxx, or Status does not say connected, first try unplugging your wireless router, then the RT300, then plug the router power back in, then the RT300, and repeat steps 1 thru 11.

14) If you did step 13 with no success, on the WLAN1 screen hit ADVANCED, highlight your network, delete the network, then hit the OK at the bottom.  Repeat steps 4 thru 11, then contact us if the problem persists.

15) Congratulations on getting the RT300 on your wireless network!  We are almost there.  Now let's test to make sure your network has no additional restrictions on the RT300.

16) Ensure USE REMOTE DATABASE has a check mark in the box.  Ensure the drop down box is set to FTP, NOT HTTPS. Then hit the green check mark at the bottom of the window.

17) At the top of the screen hit SYSTEM, then Synchronize on the menu that pops down.

18) It should say Synchronizing, and list out what it is doing (Synchronizing time, time synchronized, uploading sessions, etc).  If it goes through all this with no problem, then you are all set and ready to use the RT300 online.

Software
SAGE7, Wi Fi, Internet, Network, FTP, HTTP
 
Attachments
 
Created on June 23, 2015 at  2:31 PM (EDT). Last updated by Holbrook, Nicholas on Oct. 25, 2019 at  3:36 PM (EDT). Owned by Barriskill, Andrew.
Andrew Barriskill
Nicholas Holbrook
Show fields from Show fields from Show fields from a related table
Report Name *
Description
Reports and Charts Panel
Each table has a panel listing its reports and charts, organized in groups.
Please wait while your new report is saved...
Field label
Column heading override
Justification
What does auto mean?
Fields in:

Fields to Extract:

Name for the new table:
Items in the new table are called:

When you bring additional fields into a conversion, Quickbase often finds inconsistencies. For example, say you're converting your Companies column into its own table. One company, Acme Corporation, has offices in New York, Dallas and Portland. So, when you add the City column to the conversion, Quickbase finds three different locations for Acme. A single value in the column you're converting can only match one value in any additional field. Quickbase needs you to clean up the extra cities before it can create your new table. To do so, you have one of two choices:

  • If you want to create three separate Acme records (Acme-New York, Acme-Dallas and Acme-Portland) click the Conform link at the top of the column.
  • If the dissimilar entries are mistakes (say Acme only has one office in New York and the other locations are data-entry errors) go back into your table and correct the inconsistencies—in this case, changing all locations to New York. Then try the conversion again.

Read more about converting a column into a table.

We're glad you're interested in doing more with Quickbase!

Now we need to make you official before you share apps or manage your account.

Verifying your email lets you share Quickbase with others in your company.

Your work email
Your company